Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Frankford, PA
We provide independent HeatShield service across Frankford, and the one thing that sets our work here apart is our focus on the neighborhood’s shared twin chimneys. When one side of a party-wall stack develops a HeatShield liner or crown failure, the twin next door usually shows the symptoms first. That means we inspect both flues together, not one at a time.

Our HeatShield work in Frankford covers the full ceramic lining system, from the flue down to the firebox and up to the crown. Our technicians have up to 9 years of experience with these materials. Call (855) 259-0792 for a free estimate.
Why Frankford Residents Choose Us for HeatShield Service
HeatShield is a ceramic resurfacing system, and it behaves differently depending on what it’s bonded to. A cast-in-place liner poured against clean, sound clay tile holds for decades. The same product applied to spalling, moisture-soaked brick fails within a few heating seasons. Knowing the difference is the job, and it’s why we start every HeatShield visit with inspection rather than a brush.
Frankford’s housing rewards that approach. The rowhouses and twins along the Torresdale corridor and the numbered side streets are mostly early-to-mid 1900s brick and frame construction with original clay-tile or unlined flues. Plenty of those flues once carried coal or oil and now serve gas appliances. We read that history before we specify anything.
We also fit the work around how people actually live here. Scheduling is straightforward: you’ll know what the inspection found, what it means, and what the written estimate covers before any resurfacing begins. The local pro is licensed and insured as their state requires, and nothing gets recommended that the camera hasn’t shown you first.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Frankford
- Cracked or spalling HeatShield ceramic liner on exposed exterior chimneys. Frankford’s freezing winters and humid summers push exposed stacks through repeated freeze-thaw cycles, and a ceramic liner that was sound when installed can crack as the masonry behind it moves. We scan the full flue to find where the coating has separated before deciding whether it can be resurfaced or needs relining.
- HeatShield TherMix insulation settling or degrading. TherMix is the insulating mix that fills the gap between the new liner and the old flue wall. In former coal and oil flues converted to gas, that gap is often irregular, and the mix can settle over time. When it does, draft weakens and moisture finds a path in. We check the fill level as part of the Level 2 inspection.
- Pitted or flaking HeatShield firebox resurfacing. The Resurfacing System for fireboxes takes a beating from creosote and damp off-season air pushing through older brickwork. When the refractory coating pits or flakes, the firebox below is exposed. We strip and reapply the coating rather than patch over a failing surface.
- HeatShield crown coatings failing on shared twin chimneys. This is the Frankford problem. A crown crack on one address lets water travel into the adjacent twin’s flue through the shared wall, and the neighbor ends up with draft complaints that look like a liner failure. We diagnose both sides at once.
- HeatShield Crown Repair and Waterproofing products breaking down at the masonry joint. Crown coatings only last if the brick beneath them stays dry. Spalling brick and open mortar joints under a coated crown will crack the coating again within a few seasons. We repair the masonry first, then waterproof.
HeatShield Service in Frankford: What Local Conditions Mean for Your Equipment
Walk Frankford’s numbered side streets and you’ll see whole blocks of twins sharing a single chimney wall. That one fact shapes nearly every HeatShield call we get here. A cracked crown on one address routinely means water intrusion and draft complaints at the adjacent twin, and the homeowner next door usually has no idea their flue is the one taking on water. HeatShield crown coatings and waterproofing products are designed to stop that path, but they only work if both sides of the shared stack are assessed. Diagnosing one flue and leaving the twin alone is how a “recurring” liner problem keeps coming back. Because the neighborhood’s housing dates to the late 1800s through the 1940s, many of these shared stacks were built before anyone worried about liner compatibility, and the party wall between them is often the thinnest part of the assembly. We scan both flues in a single visit, which costs you less than two separate calls and catches the problem at its source.
HeatShield Models & Products We Service in Frankford
We work with the HeatShield Ceramic Chimney Liner system for relining aging flues, TherMix insulating mix for the fill between liner and flue wall, the Resurfacing System for fireboxes, and HeatShield Crown Repair and Waterproofing products for the top of the stack. For pre-war Frankford chimneys, choosing the right product mix matters more than choosing the product. A cast-in-place ceramic liner is the correct answer for an unlined flue with sound brick. It’s the wrong answer for a flue with active water intrusion that hasn’t been addressed yet. We use genuine HeatShield OEM components for liner and refractory repairs so the system stays compatible, and we’ll tell you plainly when a HeatShield product isn’t the right fit for your chimney’s condition.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Frankford
What a HeatShield job costs in Frankford depends on what the inspection finds. A cracked crown repair and waterproofing is a modest job. A full ceramic reline of two shared flues is a much larger one. Here’s how the ranges typically break down:

- Level 2 inspection with video scanning: quoted per chimney, with a written report and photos included.
- Crown repair and masonry waterproofing: priced per stack, and the twin side is assessed in the same visit.
- Firebox resurfacing: priced by firebox size and condition of the coating being replaced.
- HeatShield ceramic relining: priced by flue length, diameter, and whether TherMix insulation fill is required.
Every estimate is free and written. The number on the page is the number you pay. Nothing gets added after the fact. Call (855) 259-0792 for an exact quote on your Frankford chimney.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Frankford
You usually can’t tell from the ground. Dampness, a smoky draft from a gas appliance, or a faint musty smell in the room closest to the chimney are the common signals. The only reliable way to know is a Level 2 inspection with video scanning. Call (855) 259-0792 to book one.
Yes, and this is the single most important thing we do differently in Frankford. A crown crack or liner failure on one side of a shared party wall lets water into the twin next door, so a one-sided inspection often misses the actual source. We scan both flues in one visit.
Often, yes. The Cast-in-Place Ceramic Chimney Liner is well suited to an unlined or clay-tile flue that once carried coal or oil and now serves a gas appliance, provided the brick behind it is sound and dry. If the brick is spalling or the crown is failing, those get corrected first. Call us to discuss your specific flue.
Because the crown is being recoated over masonry that’s still moving. Frankford’s freeze-thaw cycles push water into open mortar joints and spalling brick, and the coating cracks again within a few seasons. The fix is repairing the brick and waterproofing the full stack, not reapplying the crown coat alone. That’s what our written estimate will spell out.
It depends on how much of the original firebox brick has been lost. Light pitting and flaking can be resurfaced with the HeatShield Resurfacing System. If the brick face is deeply eroded, resurfacing alone won’t hold, and a rebuild is the more honest answer. Call (855) 259-0792 and we’ll tell you which applies to your firebox.
Service Areas Near Frankford
HeatShield service runs through the surrounding neighborhoods as well. We cover Oxford Circle, Oak Lane, and Logan, plus Hunting Park, Germantown, and Wyncote. If you’re just over the line in any of those, a Tacony address or a Frankford one, the same twin-chimney inspection applies.
Book Your HeatShield Service in Frankford Today
Whether it’s a crown repair, a firebox resurfacing, or a full ceramic reline, the job starts with a Level 2 inspection and a free written estimate. Call (855) 259-0792. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oxford Circle.