Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Rhawnhurst
A chimney cap and crown in Rhawnhurst usually cost $475 to $1,850 depending on what’s actually on the stack: a simple set cap over one flue lands at the low end, while a custom cap plus crown rebuild on a shared party-wall chimney runs toward the top. If you’re in Rhawnhurst and water is coming down the flue after a thaw, or a squirrel has moved into an unused flue, we can look at it before the next burn season. Our technicians have up to 9 years of experience working on the mid-century brick stacks that line these blocks, and we know how tight the ladder work gets between attached roofs around Rhawnhurst.

From the firebox to the crown, we handle the whole system, so a cap or crown problem doesn’t send you hunting for a mason after the sweep leaves. Call (855) 259-0792 for a free estimate.
Why Rhawnhurst Homeowners Call Chimney Sweep Oxford Circle for Chimney Cap & Crown
We work Rhawnhurst often enough to know the housing pattern by feel: red brick, mid-century, most of these chimneys original, many of them shared across a party wall with the twin next door. A technician who has never worked a shared stack will quote you a single-flue cap, install it, and then find out it’s blocking the neighbor’s draft. We confirm which unit a flue serves before we set anything.
Our technicians have up to 9 years of experience, and all of it is on chimneys and fireplaces. Nobody on our team splits time between gutters and HVAC, which is why diagnosis on a Rhawnhurst rowhouse tends to be quicker and more accurate.
We use professional-grade materials on cap and crown work rather than whatever the supply house has on the shelf. That matters here more than it does on a freestanding suburban fireplace, because these stacks are original and can’t take another temporary fix.
Every recommendation comes with evidence you can see for yourself. If the crown can wait another season without damage, we’ll say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Rhawnhurst
Our chimney cap & crown work on Rhawnhurst rowhouses and twins is where most water and animal problems start and end. Here’s how each piece of the job actually goes.
Cap Installation in Rhawnhurst
Installing a cap on a Rhawnhurst rowhouse stack isn’t a matter of dropping a set cap on the flue tile and walking away. Hand-laid mid-century flue tiles are irregular, so a store-bought cap that measures “close enough” leaves gaps where wind-driven rain and squirrels get in. We set caps sized to the actual opening, with a mesh screen that keeps out birds and leaf litter without choking draft.
Cap Replacement in Rhawnhurst
Rusted, loose or missing caps on rear-roof stacks are one of the most common things we find in Rhawnhurst, usually after a winter of freeze-thaw cycles has worked a cheap cap loose from its fasteners. Replacement means pulling the old one, checking the tile edge for spalling, and setting a new cap that’s anchored properly rather than friction-fit. We use Gelco caps for weather performance on these exposed rear elevations.
Crown Repair in Rhawnhurst
A cracked or porous crown is the root of most of the water damage we see on original Rhawnhurst brick stacks. Meltwater works into the crack during the day, refreezes overnight, widens it, and the next thing you know the smoke chamber ceiling is stained. Crown repair on these chimneys means cutting back the failed material and rebuilding the crown with the correct slope away from the flue, not smearing sealant over the crack and hoping. Where the crown is worn but otherwise sound, HeatShield resurfacing restores it without a full rebuild.
Crown Coating in Rhawnhurst
Crown coating is the sensible middle option when a Rhawnhurst crown is starting to go but hasn’t failed structurally. A properly applied coating seals the porosity that lets freeze-thaw cycles pull these original crowns apart, buying years before a rebuild is needed. We’ll tell you plainly when coating is the right call and when it’s just postponing the inevitable.
Multi-Flue Cap and Custom Cap in Rhawnhurst
This is the work that most often goes wrong on Rhawnhurst twins. When one stack serves both units, a multi-flue cap has to be sized and set so each unit’s flue stays independently vented and serviceable. A custom cap built to the actual footprint of the chimney does that; a generic one flue cap can’t. We fabricate and fit custom caps for irregular multi-flue stacks where a stock size won’t cover correctly.
What Makes Chimney Cap & Crown Work in Rhawnhurst Different
Here’s the part that catches people. Rhawnhurst’s mid-century rowhouses and twins often share a single chimney stack across the party wall, which means capping the wrong flue or sealing a neighbor’s opening is a genuine risk, not a hypothetical one. A multi-flue cap here has to be sized and set so each unit’s flue stays independently vented and serviceable. We’ve seen cheap single-flue caps dropped over a shared stack that covered a neighbor’s opening and blocked the adjacent unit’s draft. The second fireplace doesn’t smoke back until the first one is lit, so nobody notices until it’s a problem.
A typical Rhawnhurst situation starts when a homeowner spots a missing or rusted-out cap on an original brick stack, then finds water staining on the smoke chamber ceiling after a freeze-thaw cycle, or a bird or squirrel dropping debris into an unused oil-to-gas conversion flue. The usual cause is a decades-old crown that has cracked and gone porous, combined with a store-bought cap that never fit an irregular hand-laid flue tile. A qualified local pro typically runs a Level 2 inspection, confirms the flue serves only the correct unit at the party wall, then rebuilds or coats the crown, sets a correctly sized multi-flue or custom cap, and checks the flashing where the stack meets the roof plane.

The climate does the rest. Philadelphia’s freeze-thaw winters and humid summers stress the original mortar and clay liners on these older brick stacks. Annual inspection and crown or flashing repair are a seasonal necessity here, not a luxury.
Trusted Brands We Service in Rhawnhurst
We source cap and crown components from Gelco and Famco for engineered weather performance, and use Copperfield and Olympia Chimney as wholesale suppliers for the fittings and venting these jobs require. On crown restoration we apply HeatShield resurfacing, a code-compliant repair system for deteriorating flue tiles. We use DuraFlex flexible liner systems when a crown or cap problem turns out to have damaged the liner underneath, which happens more often than people expect on original clay flues. We don’t claim to stock parts locally; we source what the job actually needs and get it to your Rhawnhurst address without a second contractor in the loop.
Common Chimney Cap & Crown Problems We See in Rhawnhurst Homes
- Cracked, porous original crowns letting meltwater in. On Rhawnhurst’s original brick stacks, a failed crown during freeze-thaw cycles sends water into the smoke chamber. Spalling brick and liner damage follow, which is why crown repair is one of the most common jobs we run on these roofs.
- A shared party-wall stack with a cheap single-flue cap. A cap that covers a neighbor’s opening or blocks the adjacent unit’s draft only shows up when the second fireplace smokes back. Multi-flue and custom caps exist precisely for this problem.
- Rusted or loose store-bought caps blown off rear-roof stacks. Once the cap is gone, the clay flue liner sits open to rain, squirrels and leaf litter on tightly packed attached roofs. Replacement is straightforward once we’ve confirmed the tile edge is sound.
- Porous crowns that haven’t failed yet. Crown coating is the sensible call here, sealing the porosity before another winter pulls the crown apart. We’ll tell you which side of that line your Rhawnhurst chimney is on.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Rhawnhurst, PA
Cap and crown pricing in Rhawnhurst follows what’s on the roof, not a flat rate. Here’s what typical jobs run:
- Cap installation (single flue, sized): $175 to $425
- Cap replacement (pull old, check tile, re-set): $225 to $575
- Multi-flue cap: $475 to $950
- Custom cap (fabricated to the actual stack): $650 to $1,350
- Crown repair (cut back and rebuild with slope): $475 to $1,050
- Crown coating: $275 to $625
These are estimates for a Rhawnhurst market, and the written estimate you receive after inspection sets the final price. Nothing gets recommended without camera evidence you can see for yourself.
Call (855) 259-0792 for an exact quote. Estimates are free.
We Also Serve Cities Near Rhawnhurst
Rhawnhurst sits close to plenty of similar rowhouse and twin neighborhoods, and the same shared-stack and original-brick crown problems show up in all of them. If you’re nearby in Mayfair, Holmesburg, Fox Chase or Oxford Circle, our chimney cap and crown team works those blocks too and will confirm access and party-wall details before quoting.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Rhawnhurst
You know because we verify which flue serves which unit before setting anything. A multi-flue cap is sized and set so each unit’s flue stays independently vented and serviceable, and we show you the layout before the cap goes on. Call (855) 259-0792 for a free estimate.
Freeze-thaw cycles. Meltwater soaks into the porous original mortar during the day and refreezes overnight, widening cracks cycle after cycle until the crown fails. Crown repair or HeatShield resurfacing restores it. Call (855) 259-0792 for a free estimate.
Yes. Gas conversion doesn’t protect the crown or the flue opening from water, animals or debris, and a capped unused flue still needs to vent correctly. We check the conversion flue alongside the active one during a Level 2 inspection. Call (855) 259-0792 for a free estimate.
It covers the full flue run with camera inspection, the crown and cap condition, the flashing where the stack meets the roof, and confirmation that each flue serves the correct unit at the party wall. A photo report is included so you can see what we see. Call (855) 259-0792 for a free estimate.
Sometimes. A poorly sized or missing cap on a shared stack is a real cause of downdraft, and a correctly sized multi-flue or custom cap fixes it. If the flue itself is blocked or the liner is damaged, a cap alone won’t solve the smoking, and we’ll tell you that plainly. Call (855) 259-0792 for a free estimate.
Same-Day Repair in Rhawnhurst
A failed cap or a crown that’s clearly letting water through gets priority. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Fast dispatch from 7am to 7pm, and we’re closed Saturday.
Call for a Free Estimate in Rhawnhurst
Whether you’re on a Rhawnhurst block of twins facing a shared stack or in a single-family rowhouse with an original crown that hasn’t been touched in years, one call gets the cap, crown, flashing and liner checked by a technician who works chimneys exclusively. No second contractor, no runaround. Call (855) 259-0792. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your free estimate and written quote come after the inspection, and nothing is recommended without camera evidence you can see.
Written by the team at Chimney Sweep Oxford Circle.