Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hunting Park
Hunting Park’s rowhouses were built in the 1890s – 1920s, and almost every one of them still has a masonry chimney at the roofline taking weather it was never designed for a century later. Crowns crack, caps go missing, and the water goes somewhere. We handle cap installation, cap replacement, crown repair, and crown coating for these blocks, and we know what the flat rooflines and tight party walls here actually look like once you’re up there. Our technicians have up to 9 years of experience working chimneys and nothing else. Call (855) 259-0792 and we’ll book you in. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.

Why Hunting Park Homeowners Call Chimney Sweep Oxford Circle for Chimney Cap & Crown
The work we’re asked to do in Hunting Park is mostly not the work the words suggest. These aren’t fireplaces being swept. They’re old flues serving gas boilers and water heaters, with crowns that have been quietly failing for years. That’s the job we show up expecting.
We stay in one trade. Every technician works chimneys and fireplaces only, so a crown that’s cracked through the freeze-thaw cycle gets diagnosed on the first visit rather than handed off to someone who mostly does gutters. Nothing is recommended without camera evidence you can watch on the screen yourself. If the crown can safely wait a season, we’ll say so. If nothing needs doing, you’ll hear that too.
Our technicians have up to 9 years of experience, and that shows up in how fast we read a Hunting Park roof: which joints are washed out, which cap is undersized, which side of the party wall the water is actually coming from. We work with professional-grade caps and coatings from Gelco, Famco, and Copperfield rather than big-box substitutes, because a cap that deforms in two summers costs more than the right one did.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Hunting Park
We cover the top of the system thoroughly. Crown Repair and Crown Coating are the two we do most often on these blocks, followed by Multi-Flue Cap work on chimneys that serve more than one appliance.
Cap Installation and Cap Replacement in Hunting Park
A cap keeps rain, squirrels, and birds out of a stack that now vents gas equipment. Many Hunting Park rowhouse chimneys are running with no cap at all, or one sized for a fireplace flue that never carried the volume a boiler does. We fit and replace caps sized to the actual flue opening, and when the chimney serves two appliances we recommend a multi-flue cap instead of patching one opening at a time.
Crown Repair in Hunting Park
The crown is the concrete or mortar cap on top of the brick, and on flat-roofed rowhouses it’s fully exposed to every freeze and thaw. When it cracks, water tracks down beside the flue tile instead of shedding off the roof. Crown repair rebuilds the slope and the overhang so water leaves the chimney rather than entering it. We check the shared party-wall side while we’re up there, because a crown failure doesn’t stop at a property line.
Crown Coating in Hunting Park
Sometimes the crown is sound but the surface has gone porous, and a flexible coating seals it without a rebuild. Coating is the right call on a crown with hairline cracking and intact structure. It’s the wrong call on one that’s already separating from the brick, and we’ll tell you which you have. HeatShield resurfacing is the system we use where the flue tiles behind the crown also need attention.
Custom and Multi-Flue Caps in Hunting Park
Party-wall chimneys on these blocks often have odd dimensions that no stock cap fits cleanly. We measure and fit custom caps where the opening isn’t standard, and multi-flue caps where a single housing covers two or three flues at once. A correctly sized cap also improves draft on gas appliances, which is the part most people don’t expect.
Trusted Brands We Service in Hunting Park
We specify Gelco and Famco caps for their weather performance, Copperfield for wholesale-grade components, and HeatShield where a flue needs resurfacing rather than replacement. DuraFlex flexible liner systems come into play when a crown repair turns up a flue that’s failed behind it. These are the materials chimney engineers specify, not substitutes picked for price. We source per job, so what you get is sized for your chimney rather than pulled from whatever was closest.
Common Chimney Cap & Crown Problems We See in Hunting Park Homes
- Cracked mortar crowns wicking freeze-thaw water. Hot, humid summers and hard freeze-thaw winters work on these exposed tops all year. Water gets in beside an unlined or clay-tile flue and rusts the appliance connector below, which then gets blamed on the boiler.
- Missing or undersized caps on gas-vented stacks. Rain, squirrels, and birds get into flues that now vent gas equipment. The resulting draft problems get misdiagnosed as appliance faults, and the appliance gets replaced when a cap would have solved it.
- Spalling brick and washed-out mortar at the party-wall line. On many blocks the rowhouse chimneys share a party-wall alignment, so one house’s crown failure pushes water into the neighbor’s flue. A single-roof fix misses half the problem.
- Flues built for fireplaces now serving boilers. The original flue was sized for wood smoke, not the cooler exhaust of modern gas equipment. That mismatch is why inspection matters more here than sweeping.
See the difference
Before
After
Before
After
Before
AfterThe Party-Wall Problem That Makes Hunting Park Different
Walk any dense block in 19140 and you’ll see it: the rowhouse chimneys line up along the party walls, roof after roof, in one continuous run. That alignment means a cracked crown or a missing cap on one house routinely sends water down into the neighbor’s flue. Not occasionally. Routinely.

So when we’re called out for a crown in Hunting Park, we check the masonry on both sides of the wall before calling the job done. Sometimes the visible failure is on one roof and the water damage is showing up two doors down. Sometimes both sides need work and the neighbor doesn’t know yet. It’s a two-house problem, and it’s why we show the camera footage rather than describing it.
How a Typical Crown Job Goes Here
On a typical Hunting Park rowhouse, the original clay-tile flue that once served a fireplace now carries a gas boiler or water heater, and the exposed crown at the flat roofline has cracked through years of freeze-thaw, letting summer storm water track down beside the liner. A qualified local pro runs a Level 2 inspection with a camera, shows the homeowner the spalling brick and open crown joint on-screen, then rebuilds or coats the crown and fits a properly sized multi-flue cap. The shared party-wall side gets checked while the pro is up there.
Pricing for Chimney Cap & Crown in Hunting Park, PA
Here’s what this work typically runs in Hunting Park, so you have a reference before anyone gets on your roof:
| Service | Typical Range |
|---|---|
| Standard cap installation (single flue) | $180 – $420 |
| Multi-flue or custom cap | $350 – $850 |
| Crown repair (rebuild) | $450 – $1,200 |
| Crown coating | $280 – $650 |
| Level 2 camera inspection | $150 – $350 |
What moves the number: how much of the crown has actually failed, whether the chimney is accessible without special rigging, cap material and dimensions, and whether the party-wall side needs work too. The written estimate sets the final price, and the estimate itself is free. Nothing on that list gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Hunting Park
The same rowhouse stock and the same party-wall problems run out past the neighborhood line. We take on crown and cap work in Logan, Germantown, East Falls, and Frankford, and the roof conditions are close enough that what we find in Hunting Park usually reads the same a few miles out. If you’re just outside the neighborhood, call and we’ll confirm coverage.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Hunting Park
Yes, and arguably more than a wood-burning chimney does. Gas appliances exhaust cooler and wetter, and an uncapped flue lets rain and animals in while a cracked crown lets water down the outside of the flue. Both affect draft and both rust the connector at the appliance. A camera inspection tells you what you actually have. Call (855) 259-0792 for an exact quote; estimates are free.
Yes. On Hunting Park’s party-wall-aligned rowhouse chimneys, a failed crown or missing cap next door can push water into your flue through the shared masonry. That’s why we check both sides of the wall during any crown job here, and why a “my roof looks fine” answer isn’t a complete one. Call (855) 259-0792 and we’ll book an inspection that covers both sides.
You see it on the camera before anything is agreed. We run a Level 2 inspection, show you the spalling brick and open crown joints on-screen, and point out what can safely wait. If we can’t show it, we don’t recommend it. That’s the whole standard. Call (855) 259-0792 for an exact quote; estimates are free.
Repair rebuilds a crown that’s structurally failing; coating seals one whose structure is sound but whose surface has gone porous. A crown separating from the brick needs the first. A crown with hairline cracking and intact slope is a candidate for the second. It’s a visual call made on the roof. Call (855) 259-0792 and we’ll tell you which you’re looking at.
Usually yes, and yes. Party-wall chimneys on these blocks often have non-standard dimensions, which is why we measure for custom caps when nothing stock fits. A properly sized multi-flue cap keeps rain and animals out of every opening and stabilizes draft on gas appliances. Call (855) 259-0792 for an exact quote; estimates are free.
If you’ve got a cracked crown, a missing cap, or a neighbor’s chimney problem showing up in your flue, get it looked at before the next freeze. Call (855) 259-0792 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oxford Circle.