Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Hunting Park
Hunting Park rowhouses were built in the 1890s to 1920s, when nearly every home had a working fireplace and a masonry chimney. Most of those original flues now vent gas boilers and water heaters instead of wood fires, which changes what a sweep needs to accomplish here. Our work in Hunting Park is mostly about inspecting and, when needed, relining aging flues for modern appliances. We know the tight streets, the flat roofs, and the way these blocks are built.

Call (855) 259-0792 to book a sweep. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Hunting Park chimney work involves inspection and relining of original flues that now serve gas equipment, not sweeping for wood fires.
- Party-wall alignment means a cracked crown on one rowhouse can push water into a neighbor’s flue, so technicians check both sides of the wall.
- HeatShield resurfacing and DuraFlex flexible liners are what we use to restore and isolate aging flues.
- The written estimate sets the price. Estimates are free.
Why Hunting Park Homeowners Call Chimney Sweep Oxford Circle for Chimney Sweep
Homeowners in Hunting Park call us because we handle the entire chimney system, from the firebox to the crown. When a Level 2 inspection turns up a cracked crown or a failing flue liner, you don’t need to schedule a second company. We sweep, inspect, repair, and reline under one call.
We work with professional-grade materials, not big-box substitutes. That means DuraFlex flexible liner systems for relining, HeatShield for resurfacing deteriorating flue tiles, and Gelco or Famco caps and venting for weather protection. Our technicians have up to 9 years of experience, and every one of them works chimneys and fireplaces exclusively. They aren’t splitting time between HVAC, gutters, or roofing, which means faster diagnosis and more accurate repairs. Every sweep includes a camera inspection and a photo report so you can see exactly what we found.
We serve Hunting Park and the surrounding blocks, and we’re used to the roof access challenges these dense streets present. Drive down nearly any block here and you’ll see the same pattern: rowhouse chimneys lined up along a shared party wall. That layout shapes how we work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Hunting Park
Our chimney sweep service covers the full range of what a Hunting Park chimney needs.
Level 2 Inspection
In Hunting Park’s attached rowhouses, a Level 2 inspection is often the most useful step you can take. It uses a camera to examine the flue interior, and we check both sides of the party wall before recommending any repair. On these blocks, a cracked crown or missing cap on one house can force water into the neighbor’s flue, so a one-sided inspection misses half the problem.
Creosote Removal
Third-degree creosote glaze is a glazed, hardened buildup that a standard brush won’t remove. In original masonry flues now serving gas appliances, creosote can obstruct draft without anyone noticing until an inspection catches it. We remove it properly so the flue vents as it should.
Chimney Crown Repair
Crumbling mortar crowns and spalling brick at the roof line are the most common failure points on Hunting Park rowhouses. Hot, humid summers and freeze-thaw winters crack these exposed crowns, and water then leaks during heavy summer storms. We repair and rebuild crowns so water stays out of your flue and your neighbor’s.
Soot Removal and Annual Sweep
An annual sweep keeps a gas boiler flue clear and lets us catch problems early. Soot removal and a routine sweep are the easiest way to stay ahead of a failing flue. If something looks off during the sweep, we photograph it and show you before recommending any work.

Trusted Brands We Service in Hunting Park
We install and service DuraFlex flexible liner systems, a professional-tier product used in chimney relining nationwide. We’re also authorized to apply HeatShield chimney resurfacing, a code-compliant repair system for deteriorated flue tiles. For caps and venting, we use Gelco and Famco products, engineered for weather performance and longevity. On many Hunting Park blocks, a properly fitted cap is what keeps water out of a shared stack. We source components from Olympia Chimney and Copperfield. No second contractor is needed for a reline or cap job.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Hunting Park Homes
- Cracked crowns on aging rowhouse chimneys. These let water migrate into adjacent flues through shared party walls. On many blocks in 19140, every rowhouse chimney shares a party-wall alignment, so a cracked crown on one house can push water into the neighbor’s flue.
- Third-degree creosote glaze in original masonry flues. Now that most flues serve gas appliances, glazed creosote can obstruct draft and go unnoticed until a Level 2 inspection catches it.
- Spalling brick at the roof line. Freeze-thaw winters crack the exposed brick tops on these flat-roofed rowhouses, and the damage compounds year over year.
- Deteriorated flashing. On flat-roofed rowhouses, failing flashing creates hidden leaks that damage both your chimney structure and your neighbor’s.
Here’s the typical pattern in Hunting Park’s attached rowhouses. A homeowner calls about a musty smell or a water stain near the chimney breast, and the source turns out to be a neighbor’s crumbling crown or missing cap forcing water into the shared stack. A qualified technician performs a Level 2 inspection with a camera, checks both sides of the party wall, and may recommend a HeatShield flue liner or a new chimney cap to isolate the flue from cross-contamination. That’s the cross-contamination risk that makes inspecting both sides of the wall a non-negotiable step for any sweep or liner job on these blocks.
Pricing for Chimney Sweep in Hunting Park, PA
Typical pricing for chimney work in Hunting Park’s market runs like this. A standard sweep and Level 1 inspection runs about $150 to $250. A Level 2 camera inspection runs about $200 to $400. Creosote removal and soot removal run about $150 to $450 depending on how much buildup there is. Chimney crown repair runs about $300 to $700, and a HeatShield flue reline runs about $1,200 to $3,500 depending on flue length and condition. The written estimate sets the final price, and estimates are free.
We Also Serve Cities Near Hunting Park
We also work in Logan, Germantown, East Falls, and Frankford – the same old rowhouse stock, the same shared flues, the same tight roofing. If you’re in any of those neighborhoods and have a chimney concern, we can help. You can learn more about our coverage on our Hunting Park page or just give us a call directly.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Hunting Park
Yes, it can. On many Hunting Park blocks, rowhouse chimneys share a party-wall alignment, so a cracked crown on one house can push water directly into the neighbor’s flue. That’s why our technicians check both sides of the wall. Call (855) 259-0792 for a free estimate.
Once a year is the right interval for a gas boiler flue. An annual inspection catches draft problems and creosote buildup early, before they become expensive. Call (855) 259-0792 to book your annual sweep.
First-degree creosote is a light, flaky soot that a standard brush removes. Third-degree creosote is a glazed, hardened buildup that a brush won’t touch and that can obstruct draft. In original masonry flues now serving gas appliances, glaze can go unnoticed until a Level 2 inspection catches it. Call (855) 259-0792 for a free estimate.
It can, because water entering a shared stack through a missing cap can migrate into an adjacent flue. A properly fitted cap stops that path. Call (855) 259-0792 and we’ll inspect both sides.
Yes. We install and service DuraFlex flexible liner systems and are authorized to apply HeatShield resurfacing for deteriorated flue tiles. Both are what we use to isolate a flue in a shared party-wall stack. Call (855) 259-0792 to schedule.
If your Hunting Park rowhouse has a chimney that needs attention, call (855) 259-0792 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect both sides of the wall, show you the photo report, and tell you plainly when work can safely wait.
Written by the team at Chimney Sweep Oxford Circle.