Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Hunting Park, PA
We service DuraFlex flexible stainless liner systems independently across Hunting Park, and what sets our DuraFlex work apart here is the housing itself: 1890s to 1920s brick rowhouses whose original fireplace flues now vent gas boilers and water heaters. That conversion changed everything about how these flues fail. We inspect the liner, the top plate, the crown and the shared masonry around it as one system, then tell you plainly what needs fixing and what can wait. To set up a visit, call (855) 259-0792. We answer 24/7. Fast dispatch from 7am to 7pm.

Why Hunting Park Residents Choose Us for DuraFlex Service
We’re an independent chimney shop, not a DuraFlex dealer and not affiliated with the manufacturer in any way. What we bring to a Hunting Park rowhouse is familiarity: we’ve worked DuraFlex single-wall and double-wall liner systems in these tight, original masonry flues long enough to know where each one tends to give out. The seam corrosion from acidic condensate. The top plate that quit sealing years ago and has been letting freeze-thaw water in ever since.
Our technicians have up to 9 years of experience, all of it on chimneys and fireplaces rather than split across HVAC or roofing work. That focus matters when a draft complaint turns out to be a shifted liner joint two floors up, or when a boiler spill traces back to a cracked crown shared with the neighbor. We use DuraFlex liner components, top plates and caps that fit the existing system, because mixing aftermarket couplers on a flexible liner invites joint separation you won’t see until it’s a problem.
Scheduling is straightforward. You describe what’s happening, we book a Level 2 inspection, and the report comes with photos you keep.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Hunting Park
Most of the DuraFlex work we do in Hunting Park comes down to a handful of failure modes, and each one ties back to how these houses were built and how they’re used now.
- Corroded or pitted liner walls. A DuraFlex single-wall liner venting a high-efficiency gas boiler sees acidic condensate the original install may never have accounted for. Over time the stainless pits and thins, and the flue starts spilling instead of drafting.
- Failed top plates and cap seals at the crown. Once the seal goes, water gets into the annular space and rusts the liner from the outside in. In Hunting Park, where crowns crack in the freeze-thaw cycle and then leak through heavy summer storms, this is the failure we find most often during a sweep.
- Sagging or kinked liner sections. Original 1890s to 1920s flues weren’t sized for modern appliances. A liner that was never properly ovalized or offset-cleared can sag against the masonry and choke the draft.
- Disconnected or shifted joints. Roof-line movement and crown cracking can shift a liner joint out of alignment. It shows up as poor draft, a boiler that keeps tripping, or spillage at the appliance.
- Crown and mortar deterioration around the liner top. Crumbling mortar crowns and spalling brick at the roof line are the most common failure points on these flat-roofed rowhouses, and they put the liner at risk before the liner itself shows any problem.
DuraFlex Service in Hunting Park: What Local Conditions Mean for Your Equipment
On many blocks in 19140, every rowhouse chimney shares a party-wall alignment. That single fact changes how a DuraFlex inspection has to be run. A cracked crown or a missing cap on one house can push water straight into the neighbor’s flue through the shared masonry, so a Level 2 here routinely means checking both sides of the wall, not just the address on the work order. We’ve pulled damp insulation and rusted liner tops from a flue whose own cap was intact, all because the chimney next door had been open to the weather for a season.
The climate compounds it. Hot, humid summers followed by freeze-thaw winters work on the exposed chimney tops continuously, cracking crowns and opening seams that then take on water during heavy summer storms. For DuraFlex owners in Hunting Park, that means the crown, cap and top plate deserve as much attention as the liner itself. A liner that passes inspection can still be at risk from a crown that doesn’t.
DuraFlex Models & Products We Service in Hunting Park
We handle DuraFlex SW single-wall flexible stainless liners, DuraFlex Pro double-wall insulated liners, DuraFlex reline kits set up for gas boiler and water heater flues, and DuraFlex ovalized liners for the tight original masonry flues common in Hunting Park rowhouses. Insulated and ovalized configurations come up constantly here, because the original flues are undersized for modern equipment and an uninsulated single-wall liner can’t always hold flue temperature where it needs to be.
When we service a DuraFlex system, we use DuraFlex liner components, top plates and caps wherever the existing install is DuraFlex. That’s a parts-quality decision, not a brand loyalty one: couplers and top plates that don’t match the liner increase the chance of a joint separating or a seal failing. If the liner is beyond re-sealing, we quote a full reline instead of patching joints that will open again.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Hunting Park
Pricing depends on what the inspection finds. A standard sweep on a DuraFlex-lined flue, a Level 2 inspection with camera and photo report, crown repair, cap and top-plate replacement, and a full DuraFlex reline all sit at very different price points, and the written estimate is what sets the final number. Nothing gets recommended without camera evidence you can look at yourself.
- Sweep and Level 2 inspection: quoted per flue, based on access and liner configuration
- Crown repair or rebuild: quoted by crown size and extent of cracking
- Cap and top-plate replacement: quoted by flue count and roof access
- DuraFlex reline: quoted by liner length, diameter and insulation
The estimate is free. Call (855) 259-0792 for an exact quote.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Hunting Park
Because a sweep only clears what’s inside the flue, and a DuraFlex liner venting gas equipment usually fails on the outside or at the joints, where a brush can’t see. A Level 2 inspection runs a camera the length of the liner and checks the top plate, cap and crown, which is where the real problems live. It’s also the only way to confirm the liner is still sound before another heating season.
It can. Rowhouse chimneys on a block share party-wall alignment, and water entering through a cracked crown can migrate through the shared masonry into the flue next door. That’s why we check both sides of the wall on a Hunting Park inspection. If your crown is failing, fixing it protects two liners, not one.
It depends on what failed. If the liner passes a Level 2 inspection and only the cap, crown or top plate has failed, repair is the right call and the liner stays in service. If the liner itself is corroded, sagging or has shifted joints, we quote a full reline rather than patching joints that will separate again. The camera report tells you which case you’re in, and we’ll say plainly when work can safely wait. Call (855) 259-0792 for an exact quote.
Mostly because of acidic condensate from high-efficiency gas boilers combined with freeze-thaw water getting in from above. A single-wall liner that was never designed for the condensate load corrodes from the inside, while a failed top-plate seal rusts it from the outside. The two together shorten liner life considerably. A properly sized, insulated liner and a sealed top plate change that equation.
Often yes, but it has to be sized for the appliance, not the old fireplace opening. A converted flue serving a water heater needs a liner with the right diameter and insulation to hold draft and resist condensate, and ovalized liners are frequently needed to fit the original masonry. A Level 2 inspection confirms the flue is sound enough to reline. Call (855) 259-0792 to book one.
Service Areas Near Hunting Park
We serve Hunting Park and the neighborhoods around it, including Hunting Park, plus Oxford Circle, Oak Lane, Logan and Germantown. The rowhouse stock is similar across these blocks, and so are the DuraFlex failures we find there. If you’re near any of them, we can schedule a visit.
Book Your DuraFlex Service in Hunting Park Today
Whether it’s a routine sweep or a Level 2 inspection on a DuraFlex liner that’s been venting a boiler for years, the first step is the same. Call (855) 259-0792 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll book your visit and give you a straight answer on what your flue actually needs.
Written by the team at Chimney Sweep Oxford Circle.