Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Fox Chase, PA
We provide independent Gelco service across Fox Chase: cleaning, inspecting, repairing and installing Gelco caps, liners and dampers on the brick chimneys this neighborhood is built around. What makes our Gelco work here different is diagnosis. Most Fox Chase chimneys started life as coal flues, got tapped for oil and then gas, and the Gelco equipment on top is often the wrong size for whatever appliance is on the flue now. That’s a sizing problem, not a soot problem, and it’s what we look for first.

We’re an independent shop, not affiliated with or authorized by Gelco, so our only loyalty is to getting the fit right. Our technicians have up to 9 years of experience, every one of them on chimneys and fireplaces alone. Call (855) 259-0792. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fox Chase Residents Choose Us for Gelco Service
Working on Gelco caps, top-sealing dampers and flexible liner systems week after week teaches you the small things: how a specific top plate wants to seat, where a gasket tends to stiffen, what a properly sized insulated liner looks like at the crown when the sealant has actually held. That familiarity is why homeowners on these blocks call us back.
Fox Chase itself shapes the work. The rowhouses and twins here are owner-occupied and the fireplaces get used, so people notice when smoke backs up or a damper stops sealing. We show up, run a Level 2 inspection with a camera, and tell you what the pictures show before anything gets priced. No second contractor needed, no referral runaround. From the firebox to the crown, one company covers it. Scheduling is straightforward: you call, we book a window, and the estimate is free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Fox Chase
- Insulated Gelco liners sized for a wood insert, now running behind a gas appliance. The lower flue gas temperature from gas doesn’t drive draft the way wood did, so the liner soots up or condenses moisture. In a Fox Chase twin where the insert was swapped years ago, that shows up as a weak fire and a smell on damp days.
- Top-sealing dampers and caps with gaskets and cables stiffened by freeze-thaw. Philadelphia’s repeated snowmelt-and-refreeze cycles seize the moving parts, the damper never fully closes, and meltwater reaches the clay flue behind it. That’s the classic Fox Chase spring finding.
- Liner-to-crown terminations where the top plate sealant has cracked. Repeated snowmelt-and-refreeze cracks the seal at the top plate, letting water track down between the Gelco liner and the original clay tile. By the time you see staining inside, the tile behind is usually wet.
- Rigid Gelco liner joints in coal-era flues that were undersized from the start. When the chase was already tight, the liner had to be necked down, and now it restricts draft on a fireplace sharing that chase with the furnace.
- Spalling and efflorescence on the masonry around a cap that isn’t shedding water. Humid summers pull moisture through brick that a failing cap or crown no longer protects, and the surface flakes. Left alone, it works its way into the flue.
Gelco Service in Fox Chase: What Local Conditions Mean for Your Equipment
Here’s the local reality that drives most of our work in Fox Chase. Most chimneys here were built with clay flues sized for coal, then tapped for oil and eventually gas. A Gelco liner or top-sealing damper that looks perfectly fine from the firebox can be the wrong size for the appliance now sitting on that flue. Sizing, not soot, is often the real finding.
A typical version of this: a homeowner in a 1940s brick twin lights the fireplace on the first cold snap and gets smoke pushing back into the living room, because the original coal-era flue was later shared with the furnace and never properly relined. The fireplace and the heater are competing for one undersized flue. A qualified local pro runs a Level 2 inspection with a camera, confirms the flue sizing and any cracked tile, then either installs a correctly sized Gelco liner with a sealed top plate or repairs the crown and cap where water damage is driving the problem. Cap and damper work usually follows, since freeze-thaw has often already compromised the top termination. Built to last, not patched to pass.
Gelco Models & Products We Service in Fox Chase
We work on the full spread of Gelco components you’d find on a Fox Chase chimney. That includes stainless flexible liner kits, both single-wall and insulated, along with rigid stainless liner sections for the straighter runs. Up top we handle top-mount and multi-flue caps, and inside the firebox we service fireplace dampers and top-sealing damper assemblies.
When a part needs replacing, we match it to the existing liner system so seals and clearances stay correct. Generic hardware often misses the fit on a Gelco assembly, which is exactly how small leaks start. Brand names aren’t a sales pitch here; they’re how we keep the repair honest and the system working the way it was engineered. We use Gelco because the components are engineered to fit each other, and because a correctly matched cap or top plate is what keeps water out of the masonry.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Fox Chase
Pricing is set per job by a written estimate, and the estimate is free. What moves the number is the condition of the flue, the size and type of liner involved, whether water damage has reached the crown or cap, and how much access the chimney allows on a rowhouse or twin. A repair and reseal on a sound liner or damper is the honest call in many cases. Full replacement is reserved for cracked, collapsed or wrongly sized systems.

Every visit is diagnostic-first. Nothing is recommended without camera evidence you can see for yourself on the inspection report, and we’ll say plainly when work can safely wait until spring. Call (855) 259-0792 for an exact quote.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Fox Chase
Because the fireplace and furnace are fighting over one flue that’s too small for both. In many Fox Chase homes the coal-era clay flue was later tapped for the furnace and never relined, so when the heater fires, it steals the draft. A Level 2 inspection with a camera confirms the sizing and whether a correctly sized liner will fix it. Call (855) 259-0792 for an exact quote; estimates are free.
Yes, and it’s the freeze-thaw cycle doing it. Snowmelt soaks the assembly, overnight refreezing stiffens the gasket and cable, and the damper stops sealing flush. That leaves an opening for water and cold air to reach the clay flue behind it. A service call usually resolves it before the seal fails completely.
Often yes, and usually because of sizing rather than condition. A gas insert on an oversized or unlined coal-era flue won’t draft properly and can condense moisture into the masonry. The right answer depends on what the camera shows. We’ll tell you whether a liner is genuinely needed or whether a repair will do.
A Level 1 is a visual check of accessible parts during a routine sweep. A Level 2 adds a camera run through the flue and is what you want when there’s a change of appliance, a liner install, a sale, or smoke backing up. Given the coal-to-gas history of Fox Chase chimneys, most of our calls here start at Level 2.
Very likely. A cracked crown lets meltwater into the masonry, and repeated refreezing pushes the brick face off, which is the flaking you’re seeing. Crown repair with the right materials stops the cycle. Call (855) 259-0792 for a free estimate and let the photos decide the scope.
Service Areas Near Fox Chase
We also serve homeowners in Oxford Circle, Oak Lane, Logan, Hunting Park, Germantown and Wyncote. If your chimney has a Gelco cap, damper or liner that needs attention, reach out from any of these areas and we’ll book you in. Same trade, same diagnostic-first approach.
Learn more about our Fox Chase service and our broader Gelco work, including our Oxford Circle and Rhawnhurst pages.
Book Your Gelco Service in Fox Chase Today
Ready to get your Gelco cap, damper or liner checked? Call (855) 259-0792. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and the written price sets the final cost.
Written by the team at Chimney Sweep Oxford Circle.