Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fairmount
If your cap is missing and rain is running straight down the flue, or the crown has crumbled into the brick, call us at (855) 259-0792. We’re a chimney-only company – sweeping, liner work, caps and crowns, rebuilds – and we know Fairmount’s rowhouse stacks block by block. Caps and crowns on these old chimneys aren’t cosmetic. They’re the one thing standing between soft 1870s-1920s brick and another Philadelphia freeze-thaw winter. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Fairmount Homeowners Call Chimney Sweep Oxford Circle for Chimney Cap & Crown
Fairmount’s housing stock is dense Victorian and pre-war brick rowhouses, and the chimney work here is different from what you’d find in the suburbs. We know that. It’s why so many Fairmount homeowners come to us for cap and crown work specifically – not because we’re the largest, but because we’ve done enough work on 19130 rowhouses to know how the roofline steps and how the party-wall side of a stack can betray you.
Our technicians have up to 9 years of experience, working chimneys and fireplaces alone. No split with HVAC or gutters. That focus is why a Fairmount homeowner can schedule a cap assessment and get a real answer about the crown, not a referral to another trade.
We work with professional-grade materials – Gelco and Famco caps and venting products, HeatShield resurfacing, DuraFlex flexible liners – so a crown repair in Fairmount is done to hold up to the climate here, not just patched to pass a quick look.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fairmount
Cap Installation in Fairmount
A fair share of Fairmount chimneys arrive at our attention with no cap at all. On a rowhouse, that means water and debris are free to enter every flue opening on the stack. We install caps sized to the actual flue count at that address – important in Fairmount, where split apartments mean one stack can carry several flues for different units. A properly fitted cap keeps rain, birds, and squirrels out and lets exhaust out the way it should.
Cap Replacement in Fairmount
Older caps on Fairmount rowhouses are often rusted, bent, or wedged loose by ice. A damaged cap rattles in wind, blows off in storms, and does nothing to stop water. We remove it and install a replacement fitted to the flue opening, using Gelco or Famco products engineered to weather Philadelphia winters. If the crown underneath is failing too, we tell you at the same visit, so you don’t pay for two trips.
Crown Repair in Fairmount
The crown is the concrete or mortar surface on top of the chimney that sheds water away from the brick. In Fairmount, many are thin mortar washes poured decades ago over soft brick, and they spall and pull away from the flue through freeze-thaw cycling. Crown repair means rebuilding the crown to a proper overhanging pitch so water sheds away from the masonry, not into it. This is where we insist on a camera inspection first, so you see what we see before the quote.
Crown Coating in Fairmount
When a crown has surface cracking but enough structure remains, a coating can extend its life and seal the cracks without a full rebuild. We use HeatShield resurfacing – a code-compliant repair system for deteriorating crowns and flue surfaces – because it adheres properly to older masonry and holds up to moisture. Not every crown is a candidate, so the camera check comes first. If coating isn’t the right call, we’ll say so and explain why.
Trusted Brands We Service in Fairmount
We source cap and crown materials from professional-grade suppliers – Gelco and Famco for caps and venting products, Olympia Chimney and Copperfield for components, DuraFlex for flexible liner systems, and HeatShield for crown and flue resurfacing. These are the products certified chimney engineers specify, not the big-box substitutes. We don’t stock parts locally, but the turnaround for standard caps and materials is quick, and we schedule the installation as soon as the part is in. When your cap and crown are done, they’re done with products built to stay put through Fairmount’s winters, not patched to pass inspection day.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Fairmount Homes
- Thin mortar-wash crowns spalling. A large share of 1870s-1920s rowhouse crowns in Fairmount are a thin mortar wash over soft brick, and freeze-thaw tears them apart. Spalling pieces fall away from the flue, water gets in, and the problem spreads down the brick.
- Clay-tile or parged flues capped without checking the appliance. Many Fairmount flues were built for coal; today they vent gas furnaces, water heaters, or wood inserts. Capping a flue without confirming what’s venting into it traps moisture or restricts draft, which can show up as a smell or poor burn inside the home.
- Cracks on the party-wall side of shared stacks. Fairmount’s rowhouses share masonry and often share flues across party walls. A crack or puffback on your side can present as a smell or draft problem in the neighbor’s unit rather than at the source. Cap and crown work here has to be scoped with an eye to the adjacent unit’s flue.
- Caps sized to the wrong flue count. On a split-unit building, a single stack can carry several flues. A one-flue cap on a three-flue stack leaves two exposed. We count the flues before ordering.
Pricing for Chimney Cap & Crown in Fairmount, PA
Here’s what cap and crown work on a Fairmount rowhouse typically runs, based on the access and scope. These are estimated ranges – the written estimate you receive after inspection sets the final price, and the inspection is what keeps the number honest.
| Service | Typical Fairmount Range (estimated) |
|---|---|
| Cap installation, single flue | $250 – $525 |
| Cap replacement, single flue | $200 – $450 |
| Multi-flue cap, two or more flues | $400 – $900 |
| Crown coating | $350 – $700 |
| Crown repair (rebuild with overhanging pitch) | $600 – $1,400 |
| Custom cap for non-standard stack | $500 – $1,100 |
Roof access matters. On a Fairmount rowhouse, the stack often steps along the roofline, sometimes next to a party wall and sometimes on the front or rear slope. Getting to the crown safely costs time, and that’s part of what the estimate reflects. Nothing gets recommended that isn’t shown to you on a camera image first. Call (855) 259-0792 for a free estimate.
We Also Serve Cities Near Fairmount
Our team serves Fairmount and the surrounding neighborhoods of Northern Liberties, East Falls, Hunting Park, and Germantown. The housing stock across these areas is similar – older rowhouses, many with coal-era flues – and the cap and crown work is scoped to what’s actually on the roof. If you’re not sure whether we cover your block, call and ask.
Serving Fairmount, PA – Our Local Coverage Area
We serve Fairmount and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fairmount
It depends on how much structure is left under the crumble, which only a camera inspection shows you. A crown with surface cracks but a sound base can often be coated with HeatShield. One that’s spalled down to the flue, pulled away from the masonry, or lost its overhang usually needs a rebuild. We won’t recommend either without showing you the images. Call (855) 259-0792 for a free estimate.
Usually yes, or one properly sized multi-flue cap that covers the full stack. Each flue vents a different appliance or fireplace, and each opening is a path for water and animals. A single-flue cap on a multi-flue stack leaves the rest exposed. We count the flues and confirm which appliance vents into which before ordering anything. Call (855) 259-0792 for a free estimate.
Yes. In Fairmount’s rowhouse blocks, the chimney stack often abuts or shares masonry with the adjacent unit, so a crack or puffback on your side can show up as a smell or draft problem next door. That’s why crown repairs here are scoped with the neighbor’s flue in mind, not treated as a single-address job. Camera evidence tells us which side is actually failing. Call (855) 259-0792 for a free estimate.
Yes. A flue built for coal was sized and shaped for coal, and capping it without confirming what now vents into it can trap moisture or restrict draft. A gas furnace or water heater venting into an oversized old flue may need a properly sized liner, or the cap must be sized so the flue still vents as intended. We check the appliance and the flue together before quoting. Call (855) 259-0792 for a free estimate.
At least once a year if any appliance vents into the chimney, and after any storm that could have cracked or shifted the crown. Fairmount’s freeze-thaw winters punish mortar crowns fast, and a hairline crack on a shared stack can let water into a neighbor’s flue as easily as yours. Catching it early is cheaper than rebuilding. Call (855) 259-0792 for a free estimate.
Fairmount’s chimneys were built in an era that didn’t anticipate gas furnaces, wood inserts, or split-unit buildings. Cap and crown work here is about making that old stack shed water and vent safely for how the building is used today – not about a generic upsell. If something looks wrong on your roof, we’ll show you exactly what we found on camera before recommending any work. Nothing is recommended without evidence you can see, and if a repair can honestly wait until spring, we’ll tell you. Call (855) 259-0792. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oxford Circle.