Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fox Chase
Chimney cap and crown work in Fox Chase, PA usually starts with water. Most calls we take here come from homeowners who’ve noticed staining on the brick, a crown that’s cracking apart, or smoke that won’t go up when the fireplace is lit. You’re on a block of brick twins or a rowhouse built between the 1920s and 1950s, and the chimney on your roof was sized for a coal grate, not for the furnace and insert that got tied into it later. That matters before anyone sells you a cap. Call (855) 259-0792 and we’ll get you scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Fox Chase Homeowners Call Chimney Sweep Oxford Circle for Chimney Cap & Crown
We work chimneys and fireplaces exclusively. That single focus is what separates us from a general handyman or a sweep crew that stops at the brush. Our technicians have up to 9 years of experience, and every job they run is a chimney job, which means faster diagnosis of what’s actually behind your water stains or smoke problem.
From the firebox to the crown, we cover the whole system: sweeping, cap and crown work, liner installation, rebuilds, and fireplace repair. There’s no second contractor to chase down. When we find a cracked crown and a compromised flue tile in the same inspection, we can address both.
We source from Olympia Chimney and Copperfield, and we install Gelco and Famco caps and venting products because they’re engineered for weather performance, not just for the shelf. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fox Chase
Cap Installation in Fox Chase
A proper cap keeps rain, squirrels, and chimney swifts out of the flue. On Fox Chase’s older brick stacks, off-the-shelf caps often don’t fit the oversized or multi-flue opening, so we measure and match. We install Gelco and Famco caps built to handle Philadelphia’s freeze-thaw cycles.
Cap Replacement in Fox Chase
Store-bought caps rust out in a few seasons on this neighborhood’s chimneys, mostly because they were never sized right for the stack. When we replace one, we pull the old unit, inspect the flue tile for water intrusion underneath, and set a new cap that actually seals. If the flue tile is cracked, we’ll show you the footage before recommending relining.
Crown Repair in Fox Chase
Most Fox Chase crowns started life as a thin mortar wash with no overhang, and after 70-plus years of frost they crack and pull away from the flue tile. A real repair means rebuilding the crown with proper overhang and a bond break, not troweling another cosmetic skim over the problem. This is the repair that stops snowmelt from running down the outside of the tile and showing up as efflorescence on the brick below.
Crown Coating in Fox Chase
Where the crown is sound but the surface has started to spall, we apply HeatShield chimney resurfacing, an authorized code-compliant repair system for deteriorating masonry. It’s a legitimate option when the crown hasn’t failed structurally, and we’ll tell you when it is and when a rebuild is the honest answer. You’ll see the photos either way.
For multi-flue and custom cap work on oversized brick stacks, our chimney cap & crown team handles the fabrication and fit.
Trusted Brands We Service in Fox Chase
We fit Gelco and Famco caps on Fox Chase chimneys because both lines are engineered for weather performance and hold up where a flimsy hardware-store unit won’t. For crown resurfacing we’re authorized to apply HeatShield, and for liner work tied to cap and crown repairs we install DuraFlex flexible liner systems, a professional-tier product used in chimney relining nationwide. We source through Olympia Chimney and Copperfield. Because we specialize, we can move from diagnosis to material sourcing to installation without a subcontractor in the middle.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Fox Chase Homes
- Cracked and spalling clay tile. Original coal-era flue tile cracks and spalls with age, letting water past a crown that was never anything more than a thin mortar wash with no overhang. That’s the setup for the stained brick you see on so many Fox Chase twins.
- One undersized flue doing three jobs. A single clay flue was originally sized for a coal grate, then tapped for an oil furnace and often a gas water heater. When a fireplace gets tied in too, draft goes weak and smoke backs into the living room on the first cold snap. The crown gets blamed for what’s really a venting problem.
- Caps that don’t fit. Store-bought caps rarely fit the multi-flue or oversized brick stacks common on Fox Chase rowhouses and twins. The flue tile stays open to rain and wildlife, and the cap rusts out within a few seasons.
- Freeze-thaw damage on the crown shoulders. Philadelphia’s winters cycle snowmelt into brick and overnight refreezing, and that’s the main killer of crowns and mortar joints here. Humid summers add spalling and efflorescence on the same masonry.
Pricing for Chimney Cap & Crown in Fox Chase, PA
Here’s what this work typically runs in the Fox Chase market, so you have a number before anyone gets on your roof. A single-flue cap installation generally falls in the $250 – $550 range. Multi-flue and custom caps on oversized brick stacks run about $450 – $900 because they’re fabricated to fit. Crown repair with a proper rebuild and overhang typically costs $600 – $1,500, and crown coating with HeatShield resurfacing generally runs $450 – $900.
What moves the number is the condition underneath: whether the crown-to-flue joint has failed, whether water has reached the smoke chamber, and whether relining is part of the same repair. Nothing is recommended without camera evidence you can see. The written estimate sets the final price, and the estimate itself is free.
Call (855) 259-0792 for an exact quote – estimates are free.
We Also Serve Cities Near Fox Chase
We serve Fox Chase and the neighborhoods around it, including Fox Chase, Oxford Circle, Rhawnhurst, Mayfair, and Tacony. The brick housing stock and chimney construction are similar across these blocks, so what we find on your roof is usually what we find a few streets over. If you’re just outside Fox Chase, call and we’ll confirm coverage.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fox Chase
It’s usually neither. Smoke backing into the room on the first cold night points to a venting problem, because the original coal flue was later tapped for the furnace and often never relined, so the fireplace and the heater compete over one undersized clay flue. A cap or crown that’s failing makes it worse, but replacing the crown won’t fix draft. We run a camera to see what’s actually happening, show you the footage, and go from there. Call (855) 259-0792 for an exact quote – estimates are free.
Often not, and that’s the honest answer most Fox Chase homeowners get from us. A thin mortar wash that’s separated from the flue tile is a failed crown, and coating over it just buys a season or two before the same crack reappears. Where the crown is sound and only the surface is spalling, HeatShield resurfacing is a legitimate fix. Where it’s pulled away, a proper rebuild with overhang and a bond break is what actually stops water intrusion. The camera footage decides which one you need.
Custom, in most cases. Fox Chase’s brick twins and rowhouses often have multi-flue or oversized brick stacks that a standard cap simply doesn’t fit, which leaves the flue tile open to rain and wildlife and rusts the unit out within a few seasons. We fabricate with Gelco and Famco products to match your stack, so the cap seals correctly and lasts. Call (855) 259-0792 for an exact quote – estimates are free.
White staining is usually efflorescence, and on a Fox Chase chimney it most often means water is getting past the crown-to-flue joint and running down the outside of the tile. It can also come from a failed flashing, mortar joint, or a liner problem, and guessing between them is how people buy work they don’t need. We photograph the joint, check the spalled shoulders, and run a camera down the flue. Then you can see whether it’s the crown or something else before deciding anything.
Yes: get it inspected before you use it again, because an unused Fox Chase chimney has been sitting through every freeze-thaw cycle since the last fire. The cap may be missing or rusted through, the crown may have failed, and the flue tile may be cracked and letting water in. None of that shows from the ground. A camera inspection tells you whether you’re looking at a simple cap and crown repair or something larger, and we’ll tell you plainly if it can safely wait.
Call (855) 259-0792 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oxford Circle.