Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Fox Chase, PA
We provide independent DuraFlex service across Fox Chase, and the one thing that makes our work here different is what we find inside the chimneys: coal-era brick stacks where a DuraFlex flexible stainless liner serves the furnace while the fireplace opening still draws on bare, undersized clay. Cleaning alone rarely solves what those homeowners are calling about. Diagnosing the shared stack does.

We work on DuraFlex liners and components constantly in Fox Chase’s older masonry chimneys, and we’re not affiliated with or authorized by the manufacturer. We’re an independent shop that knows the brand’s real failure points in this housing stock. If your fireplace backs up or your liner looks rough from the roof, call (855) 259-0792 for a free estimate.
Why Fox Chase Residents Choose Us for DuraFlex Service
Fox Chase chimneys are a specific kind of problem. The housing is 1920s to 1950s brick rowhouses, twins and detached singles, and most of those stacks were built for coal, later tapped for oil, and now carry gas appliances or wood inserts. DuraFlex liners show up in these flues because the original clay was never sized for what’s burning in it today. That history matters more than any sales pitch.
We work on Fox Chase chimneys as a single-trade shop. Every technician here works chimneys and fireplaces only, not gutters or HVAC on the side, and our technicians have up to 9 years of experience. That focus is why we can look at a DuraFlex termination from the roof and tell you whether the problem is the liner, the top plate, or the masonry around it.
We use DuraFlex OEM liner components, top plates and Tee fittings wherever the existing system is identifiable, because mixing brands at the Tee and the top plate is where most draft and corrosion trouble starts. Quality aftermarket caps and clamps are fine for non-structural parts. The parts that carry flue gas and hold insulation get matched to the system that’s already there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Fox Chase
Most of the DuraFlex calls we get in Fox Chase aren’t really cleaning calls. They’re symptoms of an installation or a stack layout that stopped working. Here’s what we run into most.
- Compressed or torn insulation wrap. When a DuraFlex UltraFlex liner is pulled through an offset or a partially collapsed clay flue in a 1940s Fox Chase twin, the insulation blanket bunches at the bend. That leaves uninsulated gaps, which means hot spots and weaker draft. You usually can’t see it from either end; it takes a camera run to find it.
- Tee snout and cap corrosion. DuraFlex flexible liners serving wood inserts collect acidic flue gases that condense on the stainless Tee through humid Philadelphia summers. The crimped joint at the snout is often the first place pinhole rust appears, and a rusted Tee leaks at exactly the moment you need the draft.
- Top plate and cap seating failures. When a crown coating or flashing repair gets done without reseating the DuraFlex top plate, snowmelt from freeze-thaw cycles weeps behind the plate. That rusts the top section of the liner from the outside in.
- Liner-to-appliance connector gaps. This is the classic Fox Chase one. A gas furnace and a fireplace sharing one original coal flue, with the second appliance tied in without a proper DuraFlex Tee or adapter. Flue gases spill, and the fireplace smokes back on the first cold snap.
- Undersized flues with a liner that fits but shouldn’t. An old clay flue sized for coal can physically accept a DuraFlex liner that’s still too small for the appliance it serves. Draft suffers, creosote builds faster, and the sweep is the first person to notice.
DuraFlex Service in Fox Chase: What Local Conditions Mean for Your Equipment
The single biggest thing shaping DuraFlex work on these blocks is the shared stack. Fox Chase’s owner-occupied 1940s brick twins commonly have one original coal-era clay flue that was later tapped for an oil furnace and then a gas furnace. By now many of those stacks carry a DuraFlex liner serving the heater with an unlined fireplace flue sitting right beside it in the same chimney. That arrangement, not a simple dirty flue, is what drives most of the DuraFlex Level 2 inspection and relining calls we book here.
Then Philadelphia’s freeze-thaw winters go to work on the same masonry. Snowmelt soaks into brick and mortar, refreezes overnight, and opens the joints; humid summers push spalling and efflorescence through the same walls. For a DuraFlex owner that means the liner and the masonry around it age at different rates. A sound liner under a failing crown is a repair job, not a relining job. We’d rather tell you that than sell you a liner you don’t need.
DuraFlex Models & Products We Service in Fox Chase
We service DuraFlex flexible stainless liners and the components that make them work: UltraFlex liner kits, ProFlex liner with insulation wrap, rigid liner sections, and multi-flue and custom stainless caps. We also handle the terminations, top plates, Tees and adapters that connect those liners to the appliance and get them through the crown.
On every Fox Chase job we identify what’s actually installed before we quote anything. If the existing system is identifiable, we match DuraFlex OEM components to it so the Tee and top plate stay one system. If it isn’t, we say so and explain the options. We’re an independent DuraFlex service provider, not a dealer, so the recommendation follows the condition of your chimney rather than what’s easiest to sell.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Fox Chase
Every job is priced per job by a written estimate, and the estimate is free. What drives the range is straightforward: how accessible the stack is, whether the liner is sound or compromised, and how much masonry work sits around the termination. A cracked crown, spalling brick at the chimney top, or a top plate that was never seated properly all add scope.
For Fox Chase specifically, the shared-stack layout often means the estimate covers a Level 2 camera inspection first, then either a second DuraFlex liner for the fireplace, or crown and cap rebuilding so each appliance has its own correctly sized, sealed termination. We give you the inspection findings, a photo report you can look at yourself, and a flat estimate before any work is booked. If the crown can wait a season, we’ll tell you that too.
Call (855) 259-0792 for an exact quote. Estimates are free, and we answer 24/7. Fast dispatch from 7am to 7pm.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Fox Chase
Because the two appliances are drawing on one original coal flue and the fireplace side has no liner of its own. The furnace liner takes the flue capacity it was sized for, and the fireplace opening is left pulling on bare, undersized clay beside it. On the first cold snap the two fight for draft, and smoke comes into the room. That layout is the signature Fox Chase smoke-back call. Fixing it means a Level 2 camera inspection to confirm the arrangement, then either a second DuraFlex liner for the fireplace or a rebuilt crown and cap so each appliance has its own correctly sized, sealed termination. Call (855) 259-0792 to get that inspection scheduled.
It needs a cap that’s actually seated on a sound crown, which matters more here than the cap style itself. Snowmelt that gets behind a poorly seated top plate rusts the liner’s top section, so we look at the plate-to-crown joint before we look at the cap. A proper DuraFlex multi-flue or custom stainless cap on a reseated plate handles these winters fine.
You usually can’t tell from the firebox or the roof, because the damage happens where the liner bends. Insulation compression and tearing show up where a liner was pulled through an offset or a partially collapsed clay flue. A Level 2 camera inspection is the only reliable way to see it, and it’s what we run before recommending anything.
Yes, but the masonry gets addressed first, not after. Running a new liner under a failing crown just gives the water a path to the new stainless. We repair the crown and flashing, then install or reseat the liner and its top plate so the termination is sealed. If the existing DuraFlex liner is sound and only the masonry is failing, we repair the masonry rather than replacing the liner.
A Level 2 inspection covers the whole flue path with a camera, not just the firebox. On a DuraFlex-equipped chimney we’re looking at the liner’s full run for insulation gaps and joint integrity, the Tee and snout for corrosion, the top plate seating, the crown and flashing, and whether more than one appliance is tied into the same stack. You get the findings and a photo report you can review yourself. Call (855) 259-0792 for a free estimate on the inspection.
Service Areas Near Fox Chase
We work DuraFlex liners and chimney systems across Northeast Philadelphia. That includes Oxford Circle, Oak Lane, Logan, Hunting Park, Germantown and Wyncote, plus the surrounding blocks. If you’re in one of those neighborhoods and your chimney needs a look, the same Level 2 inspection and DuraFlex component work applies. Oxford Circle and Rhawnhurst are both a short call away.
Book Your DuraFlex Service in Fox Chase Today
If your fireplace smokes, your liner looks rough from the roof, or you just don’t know what’s in the stack, start with an inspection and a straight answer. Call (855) 259-0792 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oxford Circle.