Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Hunting Park, PA
We provide independent Gelco service across Hunting Park, PA – cleaning, repairing and replacing caps, dampers and screens on the rowhouse chimneys that line these blocks. What makes our Gelco work here different is party-wall awareness: on most blocks in 19140 the flues sit shoulder to shoulder, so we inspect the seam and both sides of the wall, not just your stack. Our technicians have up to 9 years of experience and work on chimney and fireplace systems only. Call (855) 259-0792. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Hunting Park Residents Choose Us for Gelco Service
Gelco caps and top-mount dampers are a familiar sight on the brick stacks of Hunting Park. We’ve worked on enough of them to know the fit quirks firsthand: which mounting legs seize after a winter, where the sealant fails first, how a screen loads up when the flue is venting a boiler instead of a fire. That knowledge comes from repeated field work on these parts in freeze-thaw conditions, not from a manufacturer badge.
We’re an independent Gelco service provider. We’re not affiliated with or authorized by the manufacturer, and we don’t claim to be. What we do claim is straightforward: we diagnose the cap or damper during your sweep, explain what we found, and install quality parts that fit the equipment properly rather than thin aftermarket substitutes that fail within a season or two.
Scheduling is simple. A call gets you on the book, a written estimate sets the price before any work begins, and one company handles the sweep, the cap replacement, the crown repair and the inspection. No second contractor, no referral runaround. Hunting Park homeowners get a straight answer about what needs doing now and what can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Hunting Park
- Clogged multi-flue cap screens on gas-vented flues. A Gelco multi-flue cap does its job on a wood-burning chimney, but when the flue underneath is venting a gas boiler or water heater, soot and airborne debris pack the mesh and restrict draft. Combustion gases then have nowhere clean to go. We pull the screen, clear it, and check the appliance side of the flue while we’re there.
- Corroded mounting legs and loosened screws. Repeated freeze-thaw cycles work on the fasteners holding a cap down. Legs corrode, screws back out, and the cap starts to shift. Left alone, a winter storm can take it off the stack entirely. We reset the cap on sound fasteners or replace it when the mounting hardware is past saving.
- Hardened top-mount damper gaskets. The gasket on a Gelco top-mount damper assembly hardens with age and stops sealing. The damper closes but doesn’t shut. Heat escapes up the flue in winter and water finds its way in during summer storms. Replacing the gasket or the assembly restores the seal.
- Cracked cap-to-crown sealant. As the mortar crown shifts through the seasons, the sealant bead between cap and crown cracks. Summer storm water runs straight down into the flue from there. We strip the old bead, reseal, and check the crown itself for movement.
- Caps with bird and animal screens that have torn free. A torn screen on a Gelco cap with bird screening invites nesting, and a blocked flue on a gas appliance is a carbon monoxide concern, not just a draft problem. We replace the screen or the whole cap when the frame has corroded through.
Gelco Service in Hunting Park: What Local Conditions Mean for Your Equipment
The rowhouses of Hunting Park went up between the 1890s and the 1920s, when nearly every one had a working fireplace and a masonry chimney built for wood smoke. Today most of those original flues serve gas boilers and water heaters instead. That shift changes what Gelco equipment on these roofs is doing. A cap that once vented a fireplace now sits over an appliance flue with different draft characteristics, different moisture loads and different debris. On many blocks in 19140 the chimneys line up along shared party walls, so a failed Gelco cap or a cracked mortar crown on one roof can push water directly down into the neighbor’s flue. We check the seam and both sides of the wall, which isn’t standard practice on detached suburban homes where every stack stands alone.
The climate adds to it. Hot, humid summers followed by freeze-thaw winters hammer these exposed chimney tops on flat-roofed rowhouses. Crowns crack in the freeze-thaw cycle, then leak during heavy summer storms. That’s why our Gelco work in Hunting Park leans on cap replacement and crown repair as much as on cleaning. A typical call here is a homeowner noticing a damp stain or musty smell near a gas boiler or water heater flue, often after a summer storm. The usual cause is a corroded or shifted Gelco cap or a cracked mortar crown on the old brick stack letting water run down. A qualified local pro inspects from the roof and from inside, reseats or replaces the cap, repairs the crown, and checks the adjacent party-wall flue for the same intrusion.
Gelco Models & Products We Service in Hunting Park
We service the kinds of Gelco products that sit on Hunting Park chimneys: multi-flue chimney caps, single-flue stainless caps, top-mount damper assemblies, and caps fitted with bird and animal screens. Each one has its own wear pattern, and each one gets checked during a routine sweep rather than after a leak shows up on the ceiling.
When a part fails, we use Gelco-compatible OEM or equal-quality caps, dampers and screens. Thin aftermarket units don’t hold up in this climate; the fasteners rust through and the sealant cracks inside a couple of seasons. We’d rather install something that lasts. We’re honest about repair versus replacement too. A failed cap or damper gets replaced, not patched, but repointing and crown repair are usually worth doing before anyone starts talking about a rebuild. You’ll get that recommendation in writing, with the reasoning behind it.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Hunting Park
Every Gelco job in Hunting Park is priced per job by a written estimate, and the estimate is free. What drives the number is the condition of the stack and the part in question: a corroded cap that comes off cleanly is a different job from one whose fasteners have seized into the crown, and a crown repair is priced on how much mortar has to come out and go back. Liner work, when the inspection calls for it, is quoted separately once we know the flue’s actual condition.

Nothing gets recommended without camera evidence you can see for yourself. If the inspection shows the cap can wait a season or the crown just needs resealing, we’ll tell you that plainly. Call (855) 259-0792 for an exact quote on Gelco cap, damper or crown work in Hunting Park – estimates are free.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Hunting Park
Freeze-thaw cycling is the usual cause. Water gets into the mounting legs and screws, expands when it freezes, and gradually works the fasteners loose until the cap shifts or blows off in a storm. On these flat-roofed rowhouses the cap is fully exposed, so it takes the full swing of the seasons. We reset the cap on sound fasteners or replace the mounting hardware when it’s corroded through. Call (855) 259-0792 for a free estimate.
Often, yes. A cracked cap-to-crown sealant bead or a shifted cap lets storm water run down the flue, and the moisture sits against masonry that never dries out between humid spells. The smell is the symptom; the entry point is usually at the top. We inspect from the roof and inside the flue to confirm where the water is getting in before recommending any repair.
On party-wall rowhouse blocks in 19140, yes. The flues line up side by side, so a failed Gelco cap or cracked crown on one roof can send water down the adjacent flue. We check the seam and both sides of the wall as part of the inspection. It’s a five-minute addition that catches a problem the neighbor would otherwise find on their own ceiling. Call (855) 259-0792 to book it.
It can be, provided the screens stay clear. A multi-flue cap covers several flues in one unit, which suits a stack serving both a boiler and a water heater. The catch is that gas-vented flues load the mesh with soot and debris faster than a wood flue does, so the screen needs checking at every sweep. We’ll tell you during the inspection whether yours is the right fit or whether single-flue caps serve the stack better.
Repair first, in most cases. A cracked crown with sound brick beneath it is a crown repair job, not a rebuild, and repointing plus fresh mortar usually solves the water intrusion. A rebuild only becomes the answer when the brick itself is spalling deep and the stack has lost structural integrity. We show you the camera evidence and let you weigh it. Call (855) 259-0792 for a free estimate before deciding anything.
Service Areas Near Hunting Park
We work Gelco chimney cleaning across Hunting Park, PA and the rowhouse blocks around it. Homeowners in Oxford Circle, Oak Lane and Hunting Park call us for the same party-wall issues. We also serve Logan and Germantown, where the housing stock and chimney construction raise many of the same cap and crown problems.
Book Your Gelco Service in Hunting Park Today
Ready to get your Gelco cap, damper or crown sorted? Call (855) 259-0792 for a free estimate on Gelco chimney cleaning in Hunting Park. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll book your sweep, inspect the whole system from the firebox to the crown, and give you a written price before any work starts.
Written by the team at Chimney Sweep Oxford Circle.